Run Dry Protection to Keep You Cool

The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re-assembling the pump for service, make sure all “O“ rings are properly seated.

Pump Features:

• Pumps 500 gallons/hr

• Run Dry and Thermal Overload Protection

• In a Run Dry scenario, the pump will shut down (Simply let it cool down or hose it down to assist)

• 115V & 230V

• One Phase, all cords are six feet in length and are U.L. LISTED 18/3 wire

• The pump is not self-priming and requires a flooded suction

Product Specifications:

• Weight: 8.5 lbs

• Maximum Flow: 8.5 GPM (31 LPM)

• Maximum Head: 19 Feet of Head @ 8.2 PSI

• Maximum Internal Pressure: 25 PSI

• Maximum Liquid Temperature: 130° F (54° C)

• Hertz: 50/60 Hz

• Voltage: 115 & 230 Volt

• Horsepower: 1/20 HP

• RPM: 3450